The2009 victory vegas fender delete turn signal installation is a bold, stylish cruiser with a muscular stance and flowing lines. While its factory design is already eye-catching, many riders seek to enhance its appearance with aftermarket modifications. One of the most popular customizations is a rear fender delete paired with modern LED turn signal installation.
A fender delete strips away the bulky stock rear fender, creating a cleaner, sportier tail section. Paired with sleek turn signals, the bike gains a sharper and more aggressive look without sacrificing visibility or safety. This guide will walk you through every stage of the process — from gathering tools to taking the first post-installation ride — so you can confidently transform your Victory Vegas.
Tools, Materials, and Preparation for the Fender Delete
Before starting, it’s crucial to have all tools, parts, and safety gear ready. This avoids the frustration of stopping mid-project and ensures a smoother workflow.
Recommended Tools
-
Socket wrench set – for removing and installing mounting bolts.
-
Phillips & flathead screwdrivers – for trim panels and electrical covers.
-
Allen keys – for custom kit fasteners.
-
Wire cutters & crimpers – for modifying and connecting signal wiring.
Required Parts and Accessories
-
Fender delete kit specifically designed for the 2009 Victory Vegas.
-
LED turn signals (DOT-approved for road safety).
-
Electrical connectors or soldering supplies.
-
Heat shrink tubing to protect connections from moisture.
Safety Precautions
-
Disconnect the battery to prevent electrical shorts.
-
Wear gloves and safety glasses during the process.
-
Work in a stable, well-lit area to avoid mistakes or accidents.
Step-by-Step Fender Delete Installation Guide
Installing a fender delete is straightforward but requires attention to detail to avoid damaging your bike’s frame or wiring.
Removing the Stock Fender
-
Place the bike on a secure stand to prevent tipping.
-
Remove the seat to access the rear fender bolts and wiring harness.
-
Disconnect the turn signal wiring from the harness.
-
Unbolt the stock rear fender and gently lift it away from the frame.
Mounting the Fender Delete Kit
-
Align the new fender delete bracket with the factory mounting points.
-
Use the provided bolts or OEM hardware to secure it.
-
Make sure the assembly sits evenly and without tension on the frame.
Wiring Considerations
-
Route all wires neatly away from moving parts or heat sources.
-
Use zip ties to secure excess cable length.
-
Cover exposed connections with heat shrink tubing for durability.
Installing and Wiring the New Turn Signals
With the fender delete in place, you can now mount your new LED turn signals for a cleaner, modern lighting setup.
Choosing the Right Turn Signals
When selecting signals, ensure they are:
-
Voltage-compatible with the Victory Vegas system.
-
Weather-resistant to withstand rain and debris.
-
Bright and visible from multiple angles.
Wiring the Signals
-
Identify your bike’s signal wires using the wiring diagram.
-
Match the LED turn signal wires to the factory wiring colors.
-
Use crimp connectors or solder joints for secure electrical contact.
-
Apply heat shrink tubing for added protection.
Testing and Troubleshooting
-
Reconnect the battery and test both signals individually.
-
Ensure the left and right signals blink at the correct speed.
-
Adjust signal position for maximum visibility from the rear.
Final Checks, Adjustments, and Road Test
Before riding, go over your work to ensure everything is properly secured and functioning.
-
Tighten all bolts and check bracket stability.
-
Confirm all wiring is tucked away and safe from friction points.
-
Wipe down the installation area to remove fingerprints or grease.
Take the bike for a short ride to verify that the new setup works correctly in real-world conditions. Check visibility at night and confirm that the signals are easily seen by other motorists. Once satisfied, you can enjoy the sleeker, more aggressive look your Victory Vegas now sports.
